Mr. Smith asked:
What size motor is suitable for 69 jaw crusher?
What size jaw crusher is suitable for 69 jaw crusher?
What size impact crusher is suitable for 69 jaw crusher?
69 jaw crusher is a kind of equipment that mainly completes the crushing operation by simulating the movement of the two jaws of animals. It is mainly used as a coarse crusher and can handle various ores and bulk materials. The output of 69 jaw crusher is 50-160 tons per hour. In response to the question raised by Mr. Smith, the Red Star Online engineer immediately gave a detailed answer and introduction.

69 jaw crusher equipment picture
1. What size motor is suitable for 69 jaw crusher?
Answer: 69 jaw crusher is equipped with 75kw motor.
The motor can be said to be the main component of the jaw crusher. If it is unqualified and the quality is not up to standard, it is not only easy to fail and cause downtime, but also affect work efficiency, increase customer losses, and increase investment costs. Therefore, everyone is more concerned about the motor. Among them, the motor selected by Hongxing manufacturers can effectively reduce energy consumption and save costs. It has good protection and strong insulation performance, ensuring that customers use it safely and reliably. The motor has a long service life and high temperature resistance, and can operate continuously and reliably for a long time.

69 jaw crusher operation site map, equipped with 75kw motor
Extended information: 69 jaw crusher parameters
69 jaw crusher parameters
69 jaw crusher | parameters |
---|---|
Feed particle size | ≤500mm |
Discharge particle size | 65-160mm |
Capacity | 50-160t/h |
Motor power | 6P 55kw |
Overall dimensions | 2190×2206×2300mm |
2. How many sizes of jaw crushers are equipped with 69 jaw crushers?
Answer: 69 jaw crusher is equipped with PE-250×1000 model (4 units) and PE-400×600 small jaw crusher (2 units).
According to the technical parameters of 69 jaw crusher, it is usually equipped with 4 PE-250×1000 small jaw crushers, each with an hourly output of 16-52 tons and a finished product size of 25-60mm, and 2 PE-400×600 small jaw crushers, each with an hourly output of 16-105 tons, used in secondary crushing, for fine crushing after coarse crushing, and a finished product size of 20-90mm. The following is a real case that has been successfully put into production.

Small jaw crusher, fine crushing/secondary crushing
Processing materials: basalt
Discharge size: 12, 13 stone
Equipment configuration: feeder + 69 jaw crusher + PE-250×1000 small jaw crusher (4 units) + cone crusher + vibrating screen + conveyor;
3. What size impact crusher can be matched with 69 jaw crusher?
Answer: 69 jaw crusher can be matched with PF-1210, PF-1214 impact crusher.
What size impact crusher can be matched with 69 jaw crusher? The selection is mainly based on the material demand, site conditions and investment budget. The PF-1210 impact crusher produces 70-130 tons per hour, and the motor is 6P 110kw. In addition, the PF-1214 impact crusher produces 80-180 tons per hour, and the motor is 6P 132kw. As the secondary crusher, it is suitable for soft stones (such as limestone, coal gangue...). It is mainly crushed by impact. The material is repeatedly crushed between the plate hammer and the impact plate. The following is a real case that has been successfully put into production.

Impact crusher
Impact crusher (PF-1210, PF-1214)
Processing material: limestone
Discharge size: 05, 12, 13 gravel
Equipment configuration: feeder + 69 jaw crusher + PF-1210 impact crusher + vibrating screen + conveyor;
In addition to being able to match small jaw crusher and impact crusher, 69 jaw crusher can also be equipped with cone crusher (Φ1200 model). For more detailed information, please feel free to consult online at any time, as well as equipment quotation, detailed configuration plan, factory direct sales, enjoy discounts, or visit the factory for detailed understanding. At the same time, for every customer who purchases the machine, we provide one-stop EPC project general contracting service