This is an EPC turn - key project. Our company takes full responsibility from planning and equipment selection to project construction and commissioning. The EPC model features clear responsibilities, fixed total price, and considerable benefits, making it an ideal choice for large - scale sand - making projects in recent years. Our service tenet is to provide customers with a one - stop full - set solution, aiming to achieve maximum returns with minimum investment.
Project Process and Configuration
Raw materials enter the jaw crusher PE750×1060 through the bar vibrating feeder FH1260 for primary crushing. Materials ≤120mm pass through the feeding bar screen and are sent to the S5X2760 - 3 vibrating screen together with the crushed materials for screening and washing. The finished sand is directly sent to the 0 - 5mm finished sand silo. Materials ≥40mm are sent to the cone crusher buffer bin, then to the multi - cylinder cone crusher HPT300 for secondary crushing. After that, the materials enter the screening system S5X2460 - 3. Materials ≥31.5mm are sent back to form a closed - loop. ≤31.5mm finished mixtures are further screened and stored in the finished silos. Materials of 5 - 40mm enter the buffer bin of the sand - making machine 5X1145. The crushed ≤31.5mm finished sand goes to the sand silo, while ≥31.5mm materials form a closed - loop by being sent back to the buffer bin.
Customer Evaluation
Our company's products are mainly used in local infrastructure construction. With policy support, the sand - making industry has a broader prospect but also poses higher requirements. After comparison, we chose Liming Heavy Industry. Its long - standing industry reputation and EPC turn - key projects were the decisive factors. The EPC service really met our expectations, and we are very satisfied with this cooperation.
